Hytera GPS->OpenSPOT->APRS.FI

Hytera GPS->OpenSPOT->APRS.FI

Hytera CPS v7.06.02
Settings for GPS
---Conventional---
---General Setting---
Accessories
GPS -> checked
Speed Unit -> Mile/h or Km/h
GPS Update Time -> 5s
GPS Display Unit -> ddd.mm.ss
GPS Trigger
Button, Power On, Power Off, Time, Distance, -> checked
Relationship Between Time & Distance -> Time & Distance
Report Interval (day) -> 1 minute
Report Interval Distance -> 100
Longest Report Time -> 5 minute
---Network---

Hytera Custom Tones

Hytera Custom Tones
A list of custom audio tones:

Here are some customized tones for the PD982 handhelds, also in my UHF X1p. I set the volume of these tones to be linked to the volume control.

You define these tone up in the User Defined Tone part of the programming under Common. You enable these under Conventional>General>UI Indication to enable these tones in place of the default tones. I'm recalling all of this from memory so this might not be totally correct.

I like the Motorola Talk Permit Tone (TPT) used on Moto's P25 handhelds. It's similar to the old NEXTEL DirectConnect chirp but at a lower frequency. For the old NEXTEL DirectConnect tones, I programmed the PTT chirp, incoming DirectConnect call double beep, and the short end peep heard on the end of a received DirectConnect transmission. I also programmed the Motorola MOTOTRBO TPT in case I decide to use it.


Hytera Tones

Hytera DMR Catalog Video

Hytera MD782-g DMR Mobile
Hytera PD782-g Hand Held

HYTERA 782 Technical documents

HYTERA 782 Technical documents
Hytera MD782-g DMR Mobile
Hytera PD782-g Hand Held

Technica Bulletins PD78X*/78X*G Cross Sleeve Tool Download PD78X*/78X*G DMR Special FUD Upgrade Kit Download PD78X*/78X*G Emergency Call Guide Download PD78X*/78X*G Engineering Mode - RSSI Download PD78X*/78X*G Front Panel Programming Download PD78X*/78X*G Front Panel Programming PD78X Download PD78X*/78X*G How To Install Multiple Versions of CPS Download PD78X*/78X*G License Guide Download PD78X*/78X*G Wire Harness SM18N2 Download

User Manual PD78X*/78X*G English - PD782 Quick Reference User Guide Download PD78X*/78X*G English - PD78x User Manual Download PD78X*/78X*G Safety Information Booklet Download

Videos PD78X*/78X*G DMR Control Services Video Download

The same on my MD782 USA (which I believe is the same as the UK MD785) 

Hytera DMR digital analog radio TD370 | TD372 | TD375 handheld

Hytera DMR digital analog radio

Hytera DMR digital analog radio TD370 | TD372 | TD375 handheld

Hytera TD370 | TD372 | TD375 handheld

http://hytera372.blogspot.ca/

Hytera Engineering Mode RSSI Service Mode PD78x

Hytera Engineering Mode RSSI Service Mode PD78x
Entering Hytera service menu

Some Hytera models have a hidden service menu. This will display some more information. Most useful is the RSSI (Received Signal Strength Indication) value giving detail about the real quality of the received signal. I’ve tested this on the MD-785G, PD-785 and the X1p. Entering this menu can be done by pressing some buttons in the order displayed below.

Push the following buttons in speed:
MenuButton/GreenButton/BackButton/SelectButton/GreenButton/BackButton/

You're in the [Service Mode] menu;
no#1 [Last Reset Log] push the BackButton
goto menu
no#3 [Radio Info] and see the programmed radio model.
Model Number: PD782-000G0000-000000-U1-0-H

Hytera Engineering Mode RSSI Service Mode PD78x

Motorola DMR & Hytera DMR Privacy - Interworking 100%

Motorola DMR & Hytera DMR Privacy - Interworking 100%

A Motorola DMR (MotoTRBO) and a Hytera DMR both using privacy and working with one another perfectly. They can relay voice, data, text messages etc

DMR CPS Programmer by DL5MCC

What is CPSProgrammer?
DMR (Digital Mobile Radio) is a digital voice (DV) modulation scheme, which becomes more and more popular in amateur radio (ham radio). To be able to use the radio transceivers, all frequencies (channels) used must be entered as a „memory channel“ into the so called codeplug (CP). There is a huge number of local radio repeaters, as well as analogue FM repeaters and simplex frequencies, which all have to be entered into the CP by typing it manually into a programming software (CPS). Only in Germany we currently have about 270 DMR repeater, which expand to about 600 channels (2 timeslots + many mixed mode FM) only for DMR.

Features and Limitations

CPSProgrammer is an automatic programming (programming robot) of the channel information of a CPS. CPSProgrammer reads all input-information from a CSV file. CPSProgrammer is designed to interact with the existing vendor-provided CPS software. CPSProgrammer does not read or write codeplug-files (.rdt, .rcd, .rcdx).  The vendor's CPS software must be running for CPSProgrammer to update the codeplug that is open in vendor's CPS software (see picture above:  "Principle of the CPSProgrammer"). Currently supported CPS software. CSI CS700 Radio Programming Software V1.25 (2015-06-04): CS700, CS701, Kirisun DR7100 CSI CS750 CPS HAM2000 R4.00.27: CS750, CS751, CS800, CS801 Tytera MD380 Radio Programming Software V1.29.0, V1.30.0: MD380, MD390 Typtera MD390 → edit [MD380] section in .ini file: WindowTitle=CPS MD-390. Then select MD380 as CPS Retevis RT3 Radio Programming SW, V1.30.0 Hytera PD365 Hytera Customer Programming Software, V1.04.03.003.EM5: PD365, PD375

DMR Hytera programming software for beginners

DMR Hytera programming software for beginners

MD782G UHF DB-26 connector programming cable

MD782G UHF - programming cable to interface with the DB-26 connector

I have the MD782G UHF as well and could not be happier with it.

You can make your own programming cable to interface with the DB-26 connector on the back using a simple USB cable with just the ends of the other end to stick into the proper positions on the DB-26. Ordered a combined cps/firmware cable online for around $40usd. It interfaces with the front panel mic connector.


I programmed the buttons as follows;
P1 and P2 for zone changes
P3 and P4 for channel up and down
P5 is for scan
P6 sets the power level

This works for me but you may want change them up. I really like the radio and have had no issues with it. I get great reports on it and it hears equally well. I use it mobile with 6dBd gain antenna. I am going to connect up an external speaker as to improve the audio tone range in the mobile environment.

Hytera RD962 UHF 400-470 MHz DMR Repeater

Hytera RD962 UHF 400-470 MHz DMR Repeater

RD962 is a digital / analog portable repeater that is compatible with the DMR standard. This device is compact for easy transport and can be embedded with an optional mini duplexer. ... Hytera DT20 Built-in Mini Duplexer UHF 400-470 MHz.

Programming Hytera DMR Radios with Hytera CPS

Programming Hytera DMR Radios with Hytera CPS

Dealer Recommendation For Hytera

Dealer Recommendation For Hytera

some thought to a Hytera PD782. Can anybody here recommend a good dealer?

Motorola XPR 7550 vs Hytera PD782

This will be a personal comparison between the two radios and is my opinion based on what I use the radios for. Your use may differ. Here's what I'm using them for:

XPR 7550- analog/digital conventional or IPSC scanning, Capacity Plus scanning, secure conventional repeater operation (AES 256)

PD 782- analog/digital conv scanning, Connect Plus scanning, secure conv rpt operation (AES 256)

I purchased a Motorola XPR 7550 (UHF) a few weeks ago and updated it to firmware R02.50.04. Motorola made decent audio improvements with this latest f/w but apparently they pulled it due to radios experiencing TX issues on Cap+ systems. Go figure.

Hytera MD782 review

This time I’m writing a small review of my Hytera MD782 mobile radio – the latest newcomer in Hytera.

MD782 is my second Hytera radio and I couldn’t be more pleased with it. I can corfirm Hytera’s build-in quality is superb – this unit is robust and well build. All the knobs are sturdy and you can actually feel the quality.

Hytera MD782 is IP54 certified which makes it dust and splash proof.

Programming the radio

Hytera MD782 doesn’t come with a programming cable which will cost you around $80. The cable has a small dongle with a switch to select either programming or firmware uploading mode. Be sure to select programming mode before plugging it in.

HYTERA PD782 - PD785 - PD780 UHF GPIO Pins

HYTERA PD782 - PD785 - PD780  UHF
GPIO Pins

Computer cable to radio connector.

Hytera TD-372 | TD-375 Software and Firmware download

Just purchased a Hytera TD-370 Chinese (Model of the TD-372) and was looking to find the latest Software and Firmware, since its not available to me in NorthAmerica - United States.

Is this available anywhere to download?

Is it possible to turn this TD-370 into a TD-372 so I can uses the latest NA2 Firmware and Software?

Hytera TD370 | TD372 | TD375 handheld

Hytera change PD780 region to PD785

Do you know how to change PD780 region to PD785? I have a chinese unit and is driving me crazy. I know how to modify CPS to read/write the radio, but i want to modify the radio region itself.